Humbrol Enamel 63 Matt Sand

A solvent Based, fast dry paint developed for use on plastic model kits but which can also be used
on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are avaliable.

A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed
plaster, sealed hardboard and more (always check on a small test area to check suitability).

Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Thinners.
Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner.
Note that Metalcote colours are designed to be polished when fully dry.

Gloss: 1-2 hours touch dry and upto 24 hours for hard dry. Drying times will vary according to
ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night).

A 14 ml covers approx 0.3m2 depending on thickness of application.

Brushes: Use Thinners. airbrush: Flush through using Humbrol Thinners.
Product is permanent once dry.