Proline 1/10 Reaction HP SC S3 (Soft) Drag BELTED SC Rear

In The Box

• (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires
• (2) Soft Foam Inserts

  Overview

  This is a pair of Reaction HP SC 2.2"/3.0" Belted Drag Racing Tires. Pro-Line is proud to introduce the History-making Reaction HP BELTED Drag Racing Slick SC tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the all-new Reaction HP Drag tires. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, which will give you maximum control to put the power down! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line due to the soft S3 compound but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! Get maximum grip and stability so you can be faster than your racing buddies with Pro-Line's all-new Reaction HP Drag Slick SC tires!

  Please note that the Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by " diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

  Please note: All tires & wheels are sold in pairs, unless otherwise noted

  PRO10170203 | Reaction HP SC 2.2"/3.0" S3 (Soft) Drag Racing BELTED Tires (2) for SC Trucks Rear

  
  

   

  Features

  • Molded-in High-Performance Herringbone Weave Pattern Belt
  • Reaction HP Tire Will Not Balloon or Expand During Use
  • Specifically Made for No-prep Drag Racing
  • Soft S3 compound Provides Incredible Grip on Your Drag Strip
  • Belted Slicks Give You Control to Put the Power Down
  • Soft Foam Inserts Included
  • For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel
  • Tires Made in the USA, since 1982

  Fits

  • 2.2"/3.0" Short Course Rear Wheels

  Product Specs

  Compound / Hardness

  Soft

  Front or Rear

  Rear

  Inner Tire / Outer Wheel Diameter

  2.2 / 3.0 in

  Insert Material

  Open Cell

  Package Type

  Tires and Inserts

  Product Height

  4.15" (105 mm)

  Product Width

  1.8" (46 mm)

  Quantity Option

  2 in a package

  Scale

  1:10

  Tire Compound

  S3 (Soft)

  Tire Tread

  Reaction HP BELTED

  Tire Type

  Drag

  Track Surface

  Drag Racing

  Vehicle Type

  Drag Car

  Wheel Position

  Rear