HPI 1/10 EP D10 Creator Edition 2WD Drift Car Roller Chassis

HPI 161000 HPI Racing 1/10 EP Stage-D10 Creator Edition 2WD Drift Car Roller Chassis

Battery and Charger not included.

Build Your Drift Legend with the Stage-D10 Creator Edition
The Stage-D10 Creator Edition delivers a completely built drift chassis, ready for you to add your own choice of body, wheels, tires, and electronics! This is the purest form of RC Drift that is waiting only for YOUR finishing touches to make it into whatever Driftmachine you can dream of! 

Here's all you need to do to create your own RC Drifting dream car: 

START WITH THE IDEAL DRIFT PLATFORM
The Stage-D10 Creator Edition gives you HPI Racing's all-new, purpose-built 1/10th scale 2WD RWD drift chassis, ready to become the drift car you want to build.

Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped us refine the chassis, add new features and develop a box stock setup that gives you a great starting point for your own build.

And this isn't a cut-down version of the Stage-D10. The Creator Edition chassis is fully assembled to the same specification as the RTR, complete with the huge range of adjustment and tuning possibilities built into the platform.

Add your choice of electronics, body, wheels and tires and you're ready to create your own Stage-D10.

New to RWD drifting? Start with a proven chassis setup and build around it.

Already know your way around a drift chassis? The Stage-D10 gives you the base for almost any setup you want straight from the box, with no long list of option parts required.

Underneath, there's a serious amount of adjustment waiting to be explored. So start creating!

Adjustable camber links and toe block options combine with multiple front and rear roll centre and camber gain positions. Wheel hex spacing can be increased by 1mm or 2mm, while wishbone placement allows the wheelbase to be adjusted from 246mm to 264mm.
The steering system features fully adjustable Ackermann geometry, with forward, backward, up and down adjustment. There are also four servo mounting positions, giving you even more scope to change the steering setup.

Shorty battery packs can be mounted in mid or rear positions, allowing you to experiment with weight distribution and find the balance that suits your driving.

The Stage-D10 is built to be enjoyed at every level.
If you're new to RWD drifting, the factory setup gives you a great place to start. Get some track time, build your confidence and learn what the car can do. Then start experimenting.

What's In The Box?

(1) Stage-D10 Creator Edition 1/10 2WD RWD drift chassis, pre-assembled
(1) 160362 cross wrench small (plastic)
(1) 160364 turnbuckle wrench
(2) Allen wrenches (1.5mm Z901, 2mm Z904)
(1) Parts bag (spare and optional parts)
Instruction manual (startup guide)

Required for Operation (Not Included)

1/10th scale 190mm or 200mm wide car body
(4) 26mm touring car wheels and (4) 26mm drift tyres
2-4 channel surface radio system (transmitter and receiver)
Steering servo
Electronic speed controller (brushed or brushless)
Drift gyro
Motor (540 brushed or brushless)
Pinion gear (48 pitch - HPI's guide shows #6927 27T)
2S LiPo battery pack with XT-60 plug - HPI recommends #160794 Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh - XT60
Battery charger to suit your battery - HPI recommends Reactor 200 or Reactor 600
LiPo charge case - HPI recommends #160013 Plazma Pouch
AA batteries for the transmitter